EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #380 background imageLoading...
Page #380 background image
Call Features
376
Default
Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P) E2/CP920, X=1.
Live Dialpad
Live Dialpad allows the phones to automatically dial out the entered phone number without pressing the send key
after a designated period of time.
Topic
Live Dialpad Configuration
Live Dialpad Configuration
The following table lists the parameters you can use to configure live dialpad.
Parameter
phone_setting.predial_autodial <y0000000000xx>.cfg
Description
It enables or disables the live dialpad feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will automatically dial out the entered phone number on the pre-dialing screen
without pressing a send key.
Default
0
Web UI
Settings > Preference > Live Dialpad
Parameter
phone_setting.inter_digit_time <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the phone to automatically dial out the entered phone
number without pressing a send key.
Note: It works only if “phone_setting.predial_autodial is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 14
Default
4
Web UI
Settings > Preference > Inter Digit Time (1~14s)
Auto Redial
You can set the phone automatically redial the last dialed number when the callee is temporarily unavailable. Both
the number of attempts and waiting time between redials are configurable.
Topic
Auto Redial Configuration
Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.
Parameter
auto_redial.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically redial the last dialed number when the callee is tem-
porarily unavailable.
Permitted
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals