EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #132 background imageLoading...
Page #132 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
128
Default
-1
Supported
Devices
W53H, W56H
Handset UI
OK > Settings > Display > Screen Saver
Handset Name
The handset will be assigned a name by default if successfully registered to the phone. You can personalize the
handset name.
Topic
Handset Name Configuration
Handset Name Configuration
The following table lists the parameter you can use to configure the handset name.
Parameter
handset.X.name
[1]
<y0000000000xx>.cfg
Description
It configures the name of the handset.
Note: If it is set to blank, it will display the corresponding default handset name.
Permitted
Values
String within 24 characters
Default
The handset name for handset 1 is Corded phone.
The handset name for handset 2 is Handset 2.
The handset name for handset 3 is Handset 3.
The handset name for handset 4 is Handset 4.
The handset name for handset 5 is Handset 5.
Web UI
Status > Handset > Handset Name > Handset X
[1]
Phone UI
T57W/T54W:
Menu > DECT Settings > Handsets > Handset X
[1]
T53W/T53:
Menu > Settings > DECT Settings > Handsets > Handset X
[1]
Handset UI
W53H/W56H:
OK > Settings > Handset Name
DD Phone/CP930W:
Menu > Settings > Basic Settings > Phone Name
[1]
X is the handset ID. X=2-5.
Number Assignment
After the handset is registered to the phone, you can assign one or more outgoing lines or incoming lines for the
handset. The phone acts as the Handset 1 (Corded phone).
The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned
to the handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line
of the handset.

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals