Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
415
Parameter
transfer.dsskey_deal_type <y0000000000xx>.cfg
Description
It configures the transfer mode for the DSS key. When the user presses the DSS Key during a call, the
DSS Key behavior depends on the transfer mode.
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an
assigned value.
Permitted
Values
0-New Call
1-Attended Transfer
2-Blind Transfer
4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer
manually (not applicable to T48G/T46G/T42G/T41P/T29G phones)
Default
2
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Transfer > Transfer Mode via Dsskey
Conference
The Yealink phones support local conference and network conference.
Topics
Conference Type Configuration
Local Conference Configuration
Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.
The following table lists the parameter you can use to set a conference type.
Parameter
account.X.conf_type
[1]
<MAC>.cfg
Description
It configures the conference type for a specific account.
Permitted
Values
0-Local Conference
2-Network Conference
Default
0
Web UI
Account > Advanced > Conference Type
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P) E2/CP920, X=1.
Local Conference Configuration
The local conference requires a host phone to process the audio of all parties. Yealink phones support up to 3
parties (5 parties for CP920/T42U/T43U/T53/T53W/T33P/T33G/T31P/T31G/T31/T30P/T30 phones, 10 partes for
T46U/T48U/T54W/T57W) (including yourself) in a local conference call.
Note: Codecs that can support 10-party conference: G722, G723, G726, G729, PCMA, PCMU, and iLBC; the Opus codec can
only support 5-party conference.
The following table lists the parameters you can use to configure the local conference.

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm