Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
173
Early Media Configuration
Early Media Configuration
The following table lists the parameters you can use to configure the early media.
Parameter
phone_setting.early_media.rtp_sniffer.timeout
[1]
<y0000000000xx>.cfg
Description
It configures the time to wait for the phone to play the local ringback tone when the early media cannot
be played.
Permitted
Values
-1-Do not play the local ringback tone
0-Play the local ringback tone immediately
1-100-Wait for a specified time to play the local ringback tone
Default
1
Parameter
phone_setting.is_deal180 <y0000000000xx>.cfg
Description
It enables or disables the phone to deal with the 180 SIP message received after the 183 SIP mes-
sage.
Permitted
Values
0-Disabled
1-Enabled, the phone will resume and play the local ringback tone upon a subsequent 180 message
received.
Default
1
Web UI
Features > General Information > 180 Ring Workaround
Parameter
phone_setting.change_183_to_180 <y0000000000xx>.cfg
Description
It enables or disables the phone to handle the received second 183 message as the 180 message.
Permitted
Values
0-Disabled
1-Enabled, the phone will play the early media first and play the local ringback tone when receiving
the second 183 message.
Default
0
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Headset Prior
Headset prior allows users to use headset preferentially if a headset is physically connected to the IP phone. This
feature is especially useful for permanent or full-time headset users.
It is not applicable to CP920 phones.
Note: It is not applicable to the Bluetooth headset and USB headset.
Topic
Headset Prior Configuration
Headset Prior Configuration
The following table lists the parameters you can use to configure the headset prior.
Parameter
features.headset_prior <y0000000000xx>.cfg
Description
It enables or disables to preferentially use the headset mode for all incoming and outgoing calls.

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm