Yealink SIP-T33P Administrator's Guide

Phone Customization
272
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
custom.features.dsskey_unlock_password <y0000000000xx>.cfg
Description
It configures the password for unlocking the phone's dsskeys.
If it is set to a value, the phone prompts users to enter the password when using the corresponding
dsskey configured by "custom.features.dsskey_lock_type".
Permitted
Values
String within 32 characters
Default
Blank (no prompt for entering the unlock password)
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Dsskey Page Reset Configuration
The following table lists the parameter you can use to configure reset dsskey page.
Parameter
features.dsskey_page_reset.call_established.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically switch to a specified dsskey page when a call is
established.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T33P, T33G, T27G
Parameter
features.dsskey_page_reset.call_established.page <y0000000000xx>.cfg
Description
It controls which dsskey page the phone automatically switches to when a call is established.
Note: It works only if "features.dsskey_page_reset.call_established.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 3 (4 for T3 phones)
Default
1
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T33P, T33G, T27G
Parameter
features.dsskey_page_reset.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically switch to a specified dsskey page when all calls end.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T33P, T33G, T27G
Parameter
features.dsskey_page_reset.page <y0000000000xx>.cfg
Description
It controls which dsskey page the phone automatically switches to when all calls end.
Note: It works only if "features.dsskey_page_reset.enable" is set to 1 (Enabled).

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm