EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
91
Parameter Description
Default: Default value
Setting Up a Provisioning Server
You can use a provisioning server to configure your phones. A provisioning server allows for flexibility in upgrading,
maintaining and configuring the phone. Boot files, configuration files, and resource files are normally located on this
server.
Topics
Supported Provisioning Protocols
Supported Provisioning Server Discovery Methods
Configuring a Provisioning Server
Supported Provisioning Protocols
Yealink phones support several transport protocols for provisioning:
l Trivial File Transfer Protocol (TFTP)
l File Transfer Protocol (FTP)
l Hyper Text Transfer Protocol Secure (HTTPS)
l File Transfer Protocol Secure (FTPS)
Note: There are two types of FTP methods—active and passive. The phones are not compatible with active FTP.
You can specify the transport protocol in the provisioning server address, for example, http://xxxxxxx. If not spe-
cified, the TFTP protocol is used.
Topic
Provisioning Protocols Configuration
Provisioning Protocols Configuration
The following table lists the parameters you can use to configure provisioning protocols.
Parameter
static.auto_provision.server.type <y0000000000xx>.cfg
Description
It configures the protocol the phone uses to connect to the provisioning server.
Note: It works only if the protocol type is not defined in the access URL of the provisioning server con-
figured by the parameter "static.auto_provision.server.url".
Permitted
Values
1-http
2-https
3-ftp
Other values-tftp
Default
tftp
Parameter
static.auto_provision.user_agent_mac.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone's MAC address to be included in the User-Agent header of
HTTP/HTTPS request via auto provisioning.
Permitted
Values
0-Disabled
1-Enabled
Default
1

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals