EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
Audio Features
184
Parameter
features.dtmf.replace_tran <y0000000000xx>.cfg
Description
It enables or disables the phone to send designated DTMF sequences for transfer function when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > General Information > DTMF Replace Tran
Parameter
features.dtmf.transfer <y0000000000xx>.cfg
Description
It configures the DTMF sequences to be transmitted to perform call transfer.
Valid values are: 0-9, *, # and A-E.
Note: It works only if “features.dtmf.replace_tran is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > General Information > Tran Send DTMF
Local DTMF Tone
Local DTMF tone allows the phones to play a local DTMF tone during an active call. If this feature is enabled, you
can hear the DTMF tone when pressing the IP phone’s keypad during a call.
Topic
Local DTMF Tone Configuration
Local DTMF Tone Configuration
The following table lists the parameter you can use to configure the local DTMF tone.
Parameter
features.play_local_dtmf_tone_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play a local DTMF tone.
Permitted
Values
0-Disabled
1-Enabled, you can hear the DTMF tone when pressing the phone’s keypad during a call.
Default
1
Web UI
Features > General Information > Play Local DTMF Tone
Voice Quality Monitoring (VQM)
Voice quality monitoring feature allows the phones to generate various quality metrics for listening quality and con-
versational quality. These metrics can be sent between the phones in RTCP-XR packets. These metrics can also be
sent in SIP PUBLISH messages to a central voice quality report collector. Yealink phones support two mechanisms
for voice quality monitoring: RTCP-XR and VQ-RTCPXR.
Topics
RTCP-XR
VQ-RTCPXR

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals