Yealink SIP-T48G User Manual

Customizing Your Phone
103
Pairing and Connecting the Bluetooth-Enabled Mobile Phone
Before you pair a Bluetooth-Enabled mobile phone, check the Bluetooth mode on the
Bluetooth-Enabled mobile phone to make sure that the Bluetooth-Enabled mobile phone is
discoverable.
To pair and connect the Bluetooth-Enabled mobile phone with your phone:
1. Tap ->Basic->Bluetooth.
2. Activate the Bluetooth mode.
3. Tap the desired Bluetooth-Enabled mobile phone.
The IP phone will prompt the connect passkey on the touch screen, as shown below:
4. Make sure your mobile phone is showing the same passkey, and then tap OK on both
mobile phone and IP phone.
Then the IP phone will prompt “Would you like to sync phone contacts temporarily?”.
5. (Optional.) Tap OK to enable the mobile contacts sync feature and the IP phone will sync
the mobile contacts temporarily, or tap Cancel to disable mobile contacts sync feature and
the IP phone will not sync the mobile contacts. If you tap Cancel, you can also manually
enable the mobile contacts sync feature on the IP phone. For more information, refer to

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm