Administrator’s Guide for SIP-T5 Series Smart Media Phones
254
Directory->Setting->Search Source List In Dialing
Phone User Interface:
None
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled column
and then click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. To remove a list from the Enabled column, select the desired list and then click .
5. To adjust the display order of search results, select the desired list and then click
or .
The touch screen displays the search results in the adjusted order.
6. Click Confirm to accept the change.
Save Call Log
IP phones record and maintain phone events to a call log, also known as a call list. The call log
contains call information such as remote party identification, time and date of the call, and call
duration. It can be used to redial previous outgoing calls, return incoming calls, and save contact
information from call log lists to the contact directory.
IP phones maintain a local call log. Call log consists of four lists: Missed Calls, Placed Calls,
Received Calls, and Forwarded Calls. Each call log list supports up to 100 entries. To store call
information, you must enable save call log feature in advance. You can access the call history
information via web user interface: Directory->Phone Call Info.
Note
You can identify call types by the icons from a combined call log list (e.g., Local Log). For more
information on icons, refer to Appendix G: Reading Icons on page 768.
To Next Page
Loading...
Need help?
General
