Administrator’s Guide for SIP-T5 Series Smart Media Phones
360
4. Enter the conference URI in the Conference URI field.
5. Click Confirm to accept the change.
Transfer on Conference Hang Up
For a local conference, all parties drop the call when the conference initiator drops the
conference call. Transfer on conference hang up feature allows the other two parties to remain
connected when the conference initiator drops the conference call. Network conference does
not have a conference initiator, so if any party exits the network conference, the remaining
parties are still connected. For more information on network conference, refer to Network
Conference on page 358.
Procedure
Transfer on conference hang up can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure the transfer on
conference hang up.
Parameter:
transfer.tran_others_after_conf_enab
le
Configure the transfer on
conference hang up.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-transfer&q
=load