Administrator’s Guide for SIP-T5 Series Smart Media Phones
290
To configure auto answer tone via web user interface:
1. Click on Features->General Information.
2. Select the desired value in the pull-down list of Enable auto answer tone.
3. Click Confirm to accept the change.
To configure auto answer via phone user interface:
1. Tap Settings->Features->Auto Answer.
2. Tap the On radio box for the desired account.
3. Tap to accept the change.
IP Direct Auto Answer
IP direct auto answer allows IP phones to automatically answer an IP address call. IP direct auto
answer works only if allow IP call is enabled. For more information on allow IP call, refer to Allow
IP Call on page 292.
Procedure
IP direct auto answer can only be configured using the following methods.
Central Provisioning
(Configuration File)
Configure IP direct auto answer
feature.
Parameter:
features.ip_call.auto_answer.enable
Configure IP direct auto answer
feature.
Navigate to:
To Next Page
Loading...
Need help?
General
