Configuring Advanced Features
305
6. (Optional.) Enter the Send Anonymous Rejection off code in the Off Code field.
7. Click Confirm to accept the change.
To configure anonymous call rejection via phone user interface:
1. Tap Settings->Features->Anonymous Call.
2. Tap the desired line.
3. Tap the On radio box in the Anonymous Rejection field.
4. (Optional.) Tap the On or Off radio box in the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field beneath the Send Rejection Code field.
6. Tap to accept the change.
Do Not Disturb (DND)
DND allows IP phones to ignore incoming calls. Incoming calls received while DND is enabled
are logged in the Missed Calls list. DND feature can be configured on a phone or a per-line basis
depending on the DND mode. Two DND modes:
Phone (default): DND feature is effective for the IP phone.
Custom: DND feature can be configured for each or all accounts.
DND can be enabled locally through the phone or through a server. A user can activate or
deactivate DND using the DND key on the phone. The server-side DND feature disables the
local DND and call forward settings. If the server-side DND feature is enabled on any of the IP
phone’s registrations, the other registrations are not affected. For more information on call
forward, refer to Call Forward on page 335.
The DND on code and DND off code configured on IP phones are used to activate/deactivate
the server-side DND feature. They may vary on different servers.
To Next Page
Loading...
Need help?
General
