Configuring Security Features
249
Configures a new administrator
password.
Note: You can leave the password
blank.
Remote Control
Web User Interface
Enters the new configured
administrator password.
Note: The entered password must
be the same as the one configured
by the parameter “New Password”.
Remote Control
Web User Interface
To configure administrator password via web user interface:
1. Click on Security->Security.
2. Select Administrator from the pull-down list of User Type.
3. Enter the old administrator password in the Old Password field.
4. Enter a new password in the New Password field.
5. Enter the new password or leave it blank in the User Password field.
6. Click Confirm to accept the change.
To configure administrator password via the remote control:
1. Select Menu->Advanced (default password: 0000) ->Password Reset.
2. Enter the old password in the Current Password field.
3. Configure a new password in the New Password and Confirm Password fields.
4. Press the Save soft key to accept the change.
Web Server Type
Web server type determines the access protocol of the system’s web user interface. The system
supports both HTTP and HTTPS protocols for accessing the web user interface. HTTP is an
application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is a web protocol
that encrypts and decrypts user page requests as well as the pages returned by the web server.
Both the HTTP and HTTPS port numbers are configurable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
