Zebra MC67 User Manual

11 - 8 MC67 User Guide
The MC67 does not
decode with reading
bar code.
Scanning
application is not
loaded.
Load a scanning application on the MC67 or enable
DataWedge. See
DataWedge on page 3-5 or the system
administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Place the MC67 within proper scanning range.
MC67 is not
programmed for the
bar code.
Program the MC67 to accept the type of bar code being
scanned. Refer to the EMDK or DataWedge application.
MC67 is not
programmed to
generate a beep.
If the MC67 does not beep on a good decode, set the
application to generate a beep on good decode.
Battery is low. If the scanner stops emitting a laser beam upon a trigger press,
check the battery level. When the battery is low, the scanner
shuts off before the MC67 low battery condition notification.
Note: If the scanner is still not reading symbols, contact the
distributor or Zebra.
User is trying to
decode a DPM bar
code.
An MC67 with a DPM imager is required. Contact system
administrator.
Error message “SIM
Error. Cannot save
information to the SIM”
appears when copying
contacts to a SIM card.
Feature not
supported on some
SIM cards.
If error appears while copying one contact, reboot the MC67.
The contact appears on the SIM card after rebooting.
If error appears while copying multiple contacts, copy one
contact at a time and follow above solution.
Use Microsoft Outlook Exchange and ActiveSync to
synchronize contacts with Microsoft Outlook on host computer.
MC67 cannot find any
Bluetooth devices
nearby.
Too far from other
Bluetooth devices.
Move closer to the other Bluetooth device(s), within a range of
10 meters (32.8 feet).
The Bluetooth
device(s) nearby
are not turned on.
Turn on the Bluetooth device(s) to find.
The Bluetooth
device(s) are not in
discoverable mode.
Set the Bluetooth device(s) to discoverable mode. If needed,
refer to the device’s user documentation for help.
Cannot unlock MC67. User enters
incorrect password.
If the user enters an incorrect password eight times, the user is
requested to enter a code before trying again.
If the user forgot the password, contact system administrator.
Table 11-1 Troubleshooting the MC67 (Continued)
Problem Cause Solution

Zebra MC67 Specifications

General

Display diagonal	3.5 \
Display resolution	640 x 480 pixels
Display number of colors	-
Flash memory	2 GB
Internal memory	0.512 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	Instruments OMAP
Processor frequency	0.8 GHz
Processor manufacturer	Texas Instruments
USB 2.0 ports quantity	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	3600 mAh
Data network	4G, HSPA+
Wi-Fi standards	802.11a, 802.11b, 802.11g
Product color	Black
Keyboard layout	QWERTY
Operating system installed	Windows Mobile 6.5

Weight and Dimensions

Depth	33.5 mm
Width	77 mm
Height	162.2 mm
Weight	385 g