ABB ACSM1 Series User Manual

Error codes for FB500 and FC500
DP-V0 error table
Task cannot be executed, you can follow by error number.
Error no.
Description
0
Illegal parameter number
1
Parameter value cannot be changed
2
Lower or upper limit violated
3
Erroneous subindex
4
No array
5
Incorrect data type
6
Setting not allowed (can only be reset)
7
Descriptive element cannot be changed
9
Descriptive data not available
11
No parameter changes rights
15
Text array not available
17
Task cannot be executed due to operating status
(e.g. parameter is currently read-only)
18
Other error
101
Vendor specific error
102
Request not supported
103
Request cannot be completed due to communication error
110
Failure during write to non-volatile memory
111
Request aborted due to time-out
120
Parameter cannot be mapped to PZD
(size mismatch or non-existent)
121
Parameter cannot be mapped to PZD (end of memory)
122
Parameter cannot be mapped to PZD (multiple PZD write)
130
Cannot map Control Word bit (parameter 933-937, e.g. double
mapping of bits)

ABB ACSM1 Series Specifications

General

Brand	ABB
Model	ACSM1 Series
Category	Controller
Language	English