ABB ACSM1 Series User Manual

81
PLC libraries for S7-300
Adding ABB drives to PROFIBUS DP line
1. Launch TIA portal and click Open the project view in the Start options.
Note: After installing GSD files, ABB drives are added to the hardware catalog of TIA portal.
2. In the Project tree pane, double-click Device & networks.
Figure 65 Devices and network
3. From the hardware catalog pane, drag and drop the required ABB Drive to the PLC.
Figure 66 ABB Drive
4. In the ABB drive, connect PLC to the PROFIBUS interface.
Figure 67 Assign to PLC

ABB ACSM1 Series Specifications

General

Product Type	AC drive
Control Type	Scalar Control
Communication Interfaces	Modbus RTU
Protection Class	IP20
Mounting	Wall Mounting
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Storage Temperature	-40°C to +70°C
Input Voltage	380 V to 480 V AC
Operating Temperature	-10 to +40 °C (without derating)