ABB ACSM1 Series User Manual

5. In the Device view, select PLC_1 (DP interface). In the General tab, select PROFIBUS
address and click Add new subnet to add the subnet and then assign PROFIBUS address.
Figure 114 DP interface
6. After configuring PROFINET and PROFIBUS interfaces in TIA portal, click Network view to
view the PLC connections.
Figure 115 PROFIBUS and PROFINET configurations
Installing GSD file for S7-1200 PLC
To install GSD file, see section Installing GSD file for S7-300 PLC (page 79).

ABB ACSM1 Series Specifications

General

Brand	ABB
Model	ACSM1 Series
Category	Controller
Language	English