Note
•
If data analysis requires time, a message dialog will appear. If you select No, you will return to the applica-
tion.
5
Select Roll Paper Width that is set in the printer.
6
Select image size.
7
Select layout.
8
To configure Binding, click the Binding Settings button.
Refer to "Configuring Binding (Excel)" ➔P.244 for details on the procedure for configuring Binding.
9
Select Next.
10
Select Media Type.
11
Enter Copies.
12
If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper).
The upper and lower margins can be checked in Print Preview.
Note
•
When Print in Draft mode is selected, printing is fast but the print quality is poor.
•
When Saturation is selected, you can print posters, etc., vividly.
•
Press the Print Preview button to display the preview screen. You can check and make changes to the
layout in the preview screen.
•
When you print to the edge of the roll width, the maximum print length is 18.0m.
13
Press Print to start printing.
Important
•
If divided into plural pages, try reducing the data size or the range you select.
•
You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.
Configuring Binding (Excel)
Configuring Binding (Excel)
You can configure Binding margins for binding printouts.
1
Configure the settings up to Layout Selection in the Layout screen in Print Entire Sheet or Print Selec-
ted Area.
Refer to "Print Entire Sheet(Excel)" ➔P.239 and "Print Selected Area(Excel)" ➔P.242 for the configuration
methods.
Configuring Binding (Excel)
iPF770
User's Guide
Windows Software Print Plug-In for Office
244
To Next Page
Loading...
Need help?
General
Weight and Dimensions
