EasyManuals Logo
Home>Canon>Printer>imagePROGRAF iPF770

Canon imagePROGRAF iPF770 User Manual

Canon imagePROGRAF iPF770
594 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #545 background imageLoading...
Page #545 background image
Cannot print over a network
Cannot print over a network
Cannot connect the printer to the network ..................................................................................................... 545
Cannot print over a TCP/IP network ............................................................................................................... 545
Cannot print over a Bonjour network .............................................................................................................. 545
Cannot connect the printer to the network
Cannot connect the printer to the network
Cause Corrective Action
The Ethernet cable
is not connected
correctly to the
printer's Ethernet
port.
1.
Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer
on. For instructions on connecting the cable, refer to the Setup Guide.
2.
Make sure the Link indicator is lit.
The bottom indicator is green if the printer is connected via 1000Base-T, while the top indicator is orange
if connected via 100Base-TX and the top indicator is green if connected via 10Base-T.
If the Link indicator is not lit, check the following points.
Make sure the connection point is on.
Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.
Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.
Check the communication mode with the connection point.
Although the printer normally detects the communication mode and transmission rate of the communi-
cation point automatically (in auto negotiation mode), sometimes the communication point settings
cannot be detected. In this case, configure the connection method manually, specifying the communi-
cation mode in use.
(See "Configuring the Communication Mode Manually.") P.455
Cannot print over a TCP/IP network
Cannot print over a TCP/IP network
Cause Corrective Action
The printer's IP address is not configured
correctly.
Make sure the printer's IP address is configured correctly.
(See "Configuring the IP Address Using imagePROGRAF Device Setup Utility.") P.457
(See "Configuring the IP Address Using the Printer Control Panel.") P.446
The printer's TCP/IP network settings are
not configured correctly.
Make sure the printer's TCP/IP network settings are configured correctly.
(See "Configuring the Printer's TCP/IP Network Settings With RemoteUI.") P.450
The computer you are trying to print from
is not configured correctly.
Make sure the computer's TCP/IP network settings are configured correctly.
(See "Configuring the Printer Driver Destination (Windows).") P.449
(See "Configuring the Destination in TCP/IP Networks (Mac OS).") P.453
Cannot print over a Bonjour network
Cannot print over a Bonjour network
Cause Corrective Action
The computer you are trying to
print from is not configured cor-
rectly.
Make sure the computer is configured correctly.
(See "Configuring the Destination for Bonjour Network (Mac OS).") P.453
The computer and printer are not
on the same network.
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a rout-
er. Make sure the computer and printer are on the same network. For information about net-
work settings, ask your network administrator.
iPF770
Cannot connect the printer to the network
User's Guide
Troubleshooting Cannot print over a network
545

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF770 and is the answer not in the manual?

Canon imagePROGRAF iPF770 Specifications

General IconGeneral
ColorYes
Printing colorsBlack, Cyan, Magenta, Matte black, Yellow
Print technologyInkjet
Maximum resolution2400 x 1200 DPI
Number of print cartridges5
Page description languagesGARO, HP-GL/2, HP-RTL
CertificationCE, TUV, Gost-R, WEEE, ErP, EAC, RoHS, WEEE
Product colorBlack, Grey
Sound pressure level (printing)46 dB
USB connectorUSB Type-A
USB 2.0 ports quantity1
Ethernet interface typeGigabit Ethernet
Media thickness0.07 - 1.5 mm
Maximum print sizeA0 (841 x 1189 mm)
Maximum roll length18 m
Media width (sheets)914.4 mm
Maximum roll diameter150 mm
ISO A-series sizes (A0...A9)A0, A1, A2, A3
ISO B-series sizes (B0...B9)B1, B2, B4
Borderless printing media sizesA0, A1, A2, A3, B4
Minimum system requirementsWindows XP, Vista, 7, 8, 8.1, Server 2003/2003R2, Server 2008/2008R2, Server 2012/2012R2 Mac X 10.6.8 - 10.10+
Power consumption (standby)0.5 W
Power consumption (typical)140 W
Power consumption (PowerSave)5 W
Storage temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)10 - 80 %
Sustainability certificatesENERGY STAR
Accuracy0.2 %
Scan speed (black)3 ips
Scan speed (color)1 ips
Weight and Dimensions IconWeight and Dimensions
Depth1100 mm
Width1304 mm
Height1062 mm

Related product manuals