dvanced Guide
>
Troubleshooting
> Message Appears on the Computer Screen
Message Appears on the Computer Screen
Service Error 5100 Is Displayed
Writing Error/Output Error/Communication Error
Error Number: 300 Is Displayed
Error Number: 1700 Is Displayed
Ink Info Number: 1600 Is Displayed
Ink Info Number: 1683 Is Displayed
Ink Info Number: 1688 Is Displayed
Error Number: 2001 Is Displayed
Error Number: 2002 Is Displayed
Other Error Messages
Service Error 5100 Is Displayed
Check: Is the movement of the Print Head Holder blocked?
Cancel printing from your computer and turn off the printer. Then clear the jammed paper or
protective material that is preventing the Print Head Holder from moving.
Important
Be careful not to touch the components inside the printer. The printer may not print out
properly if you touch it.
Turn the printer back on.
If the same error occurs, contact your Canon service representative.
Writing Error/Output Error/Communication Error
Check 1: If the
Power
lamp is off, make sure that the power plug is plugged in,
then turn the printer on.
While the
Power
lamp is flashing green, the printer is initializing. Wait until the
Power
lamp
stops flashing and remains lit green.
Check 2: Make sure that the printer port is configured appropriately in the printer
driver.
* In the following instructions, "
XXX
" signifies your printer's name.
1.
Log on as a user account with administrator privilege.
2.
Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and
Faxes.
In Windows 2000, click Control Panel then Printers.
3.
Right-click the Canon XXX icon, then select Properties.
4.
Click the Ports tab to confirm the port settings.
5.
Make sure that a port named USBnnn (where "n" is a number) with Canon XXX
appearing in the Printer column is selected for Print to the following port(s).
Стр. 329 из 366 стр.Message Appears on the Computer Screen
To Next Page
Loading...
Need help?
General
