ppendix
> Connecting the Printer to the Network
Connecting the Printer to the Network
If multiple computers are being used in the network environment, you can share the printer connected to
one computer with other computers.
The Windows versions of the computers connected to the network do not necessarily have to be the
same.
Settings on Print Server
Describes the procedure for setting up a computer directly connected to a printer with a USB cable.
Settings on Client PC
Describes the procedure for setting up those computers that will use this printer through the
network.
When you execute print, the data is sent through the print server system to the printer.
Important
In case an error occurred when a document is printed by the client system to a shared printer, the
error message of Canon IJ Status Monitor will be displayed both on the client system and the print
server system. For regular printing, Canon IJ Status Monitor will be displayed only on the client
system.
Note
Install the printer driver from the Setup CD-ROM that accompanies the printer on the print server
system and each of the client systems according to the OS of each system.
Related Topic
Restrictions on Network Printing
Page top
Стр. 358 из 366 стр.Connecting the Printer to the Network
To Next Page
Loading...
Need help?
General
