ppendix > Safety Precautions
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use the printer
safely. Do not attempt to use the printer in any way not described in this manual. It causes unexpected
accident, fire, or electrical shock.
Warning
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
You may cause an electric shock, fire, or damage the printer if you ignore any of these safety
precautions.
Choosing a
location
Do not place the printer close to flammable solvents such as
alcohol or thinners.
Power
supply
Never attempt to plug in or unplug the printer from the power
supply when your hands are wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or
excessively bend or twist the power
cord.
Do not place heavy objects on
the power cord.
Never plug the printer into a power
socket that is shared with other
equipment (extension lead/cord, 2- or
3-way adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around
the printer, immediately unplug the printer at the power supply
and call for service.
Periodically, unplug the printer and
use a dry cloth to wipe off any dust or
dirt collected on the plug and the
power outlet.If the printer is placed at
a location exposed to a lot of dust,
smoke, or high humidity, the dust
collected on the plug absorbs
moisture and may cause insulation
failure and fire.
If you hear thunder, disconnect the power supply of the printer
and refrain from using it.
Leaving the printer plugged in may
cause fire, electric shock, or damage to the printer, depending
on the thunder storm.
Use the power cable included with the printer.
Cleaning the
printer
Use a damp cloth to clean the printer.
Never use flammable solvents such
as alcohol, benzene or thinners.
If flammable solvents come in contact with
electrical components inside the printer, it
could cause a fire or electric shock.
Always unplug the printer from the power outlet before
cleaning the printer.
Стр. 74 из 366 стр.Safety Precautions
To Next Page
Loading...
Need help?
General
