[Volume Settings] Screen
8WFY-03Y
When you pr
ess [Menu]
[Preferences] [Volume Settings] on the [Home] screen of the control panel, the [Volume
Settings] scr
een is displayed.
You can adjust the volume of notiî ´cation sounds, such as when faxes are successfully sent and received, and set
whether the machine emits sounds notifying you of operations and statuses.
[Fax Tone] / [Ring Tone] / [TX Done Tone] / [RX Done Tone] / [Scanning Done Tone]
Y
ou can adjust the volume of the following notiî ´cation sounds: When sending fax, when receiving a fax, when fax
sending is complete, when fax receiving is completed, or when scanning fax originals is completed.
[Entry Tone]
Set whether to emit a sound when you press the keys and buttons on the control panel.
[Invalid Entry Tone]
Set whether to emit a sound when an invalid key is pressed, such as when you enter a value outside the setting range.
[Restock Supplies Tone]
Set whether to emit a sound when the toner cartridges are nearing the end of their lifetime.
[Warning Tone]
Set whether to emit a sound when the machine has a paper jam or other malfunction.
[Job Done Tone]
Set whether to emit a sound when the copy, scan, or other operation on the machine is completed.
[Energy Saver Alert]
Set whether to emit a sound when the machine enters and exits sleep mode.
[Original in Feeder Detection Tone]
Set whether to emit a sound when the machine detects an original that has been placed on the feeder.
Basic Operations
192
To Next Page
Loading...
Need help?
General