Cleaning the Surface of the Machine
8WFY-0AF
Regularly clean the surface of the machine to k
eep it clean. In addition, remove dust from the ventilation holes to
ensure ecient ventilation and cooling of the inside of the machine.
1
Turn OFF the power and remove the power cord from the outlet.
Turning OFF the
Machine(P
. 108)
Turning OFF the machine deletes any data waiting to be printed.
2
Wipe the surface of the machine and the ventilation slots.
● Wipe with a soft cloth soak
ed in water or diluted neutral detergent and wrung out.
● For the location of the ventilation slots, see the part names on the front of the machine.
Front Side(P. 10)
3
Allow the parts to fully dry.
4
Plug the power cord into the outlet, and turn ON the machine.
Turning ON the
Machine(P
. 107)
Maintenance
515
To Next Page
Loading...
Need help?
General