Preparing to Send Scanned Data by E-mail
8WFY-04R
Conî ´gur
e the settings of the e-mail server to be used to send e-mail. Depending on the settings, use either of the
following methods to conî ´gure the settings from a computer. You cannot use the control panel to conî ´gure the
settings.
Conî ´guring the Basic Settings for Sending E-mail (Windows)
Conî ´gure the basic settings of the e-mail server. You can also register destination e-mail addresses to One-
Touch in the Address Book. Use Send Function Setting Tool to conî ´gure the settings.
Conî ´guring the Basic Settings for Sending E-mail (Send Function Setting T
ool)(P. 232)
* One-Touch is a list of destinations that can be recalled with [
] in the Address Book or [One-Touch] in the
[Home] Scr
een.
Address Book Function(P. 165)
[Home] Screen(P. 116)
Conî ´guring Detailed Information of the E-mail Server
In addition to the basic information of the e-mail server, you can also conî ´gur
e POP authentication before
sending and encryption communication settings. Use Remote UI to conî ´gure the settings.
Conî ´guring Detailed Information of the E-mail Server (Remote UI)(P
. 235)
* Register destination e-mail addresses to the Address Book as needed.
Registering Destinations to the Address Book (Control Panel)(P. 167)
Registering Destinations to the Address Book (Remote UI)(P. 172)
Scanning
231
To Next Page
Loading...
Need help?
General
