Registering a Shared Folder to the Address Book (Send
Function Setting T
ool)
8WFY-04Y
Use the Send Function Setting T
ool from a computer to register the shared folder information to One-Touch in the
Address Book.
* One-Touch is a list of destinations that can be recalled with [
] in the Address Book or [One-Touch] in the [Home]
Scr
een.
Address Book Function(P. 165)
[Home] Screen(P. 116)
Administr
ator privileges are required. The machine must be restarted to apply the settings.
Required Preparations
● Connect the computer you ar
e using to congure the settings to the machine over a network.
● Prepare the following information and keep it close by.
- IP address of the machine
Checking the Network Status and Settings(P. 92)
-
Name or IP address of the computer with the shared folder
Viewing the System Information of the Computer(P. 655)
Viewing the Network Connection Information of the Computer(P. 657)
-
Path to the shared folder
- User name and password used for accessing the shared folder (if Restrict Access is set)
1
From a Web browser on a computer, access the following URL.
http://<IP address of this machine>/sendsupport_login.html
➠ The [Start Settings] scr
een of the Send Function Setting Tool is displayed.
You can also use the downloaded le to start the Send Function Setting Tool.
Using the Downloaded Send
Function Setting T
ool(P. 234)
2
Click [Start].
If the login screen appears, enter the System Manager ID and PIN, and then click [Logon].
3
Click [Store to Shared Folder Settings].
➠ The [Stor
e to Shared Folder Settings] screen is displayed.
If the [Enter Address Book Password] screen appears, enter the PIN, and then click [OK].
Scanning
238
To Next Page
Loading...
Need help?
General
