Clearing the Mail Box
8WFY-08H
When scanned data is sent b
y e-mail and a send error occurs, the mail server may send an error notication e-mail to
the e-mail address of the machine. Delete all mail from the server mail box, as needed, so that the mail box does not
become full with notication mail.
Clear the mail box using Remote UI from a computer. You cannot use the control panel to clear the mail box.
Administrator privileges are required.
● When the mail bo
x is cleared, all mail in the e-mail inbox of the server is deleted. Be careful not to delete
needed unread mail.
1
Log in to Remote UI in System Manager Mode.
Starting Remote UI(P. 393)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 395)
3
Click [TX Settings]
[E-Mail Settings].
➠ The [E-Mail Settings] scr
een is displayed.
4
In [Clear Mail Box], click [Clear].
5
Click [OK].
➠ All mail in the mail bo
x on the server is deleted.
6
Log out from Remote UI.
Managing the Machine
407
To Next Page
Loading...
Need help?
General