[R-Key Setting]
[Menu] [Function Settings] [Send] [Fax Settings]
If the machine is connected through a PBX (Private Branch Exchange), it is necessary to set the access method.
If you set the machine to [PB
X], the [R] key will be displayed on the Fax Basic Features screen. If you assign an
outside line access number to the [R] key, you can easily access the outside line.
* Select [PBX] when you want the machine to be connected through a PBX (Private Branch Exchange). Set the
function of the [R] key displayed on the Fax Basic Features screen to [Preî ´x] or [Hooking]. If you select [Preî ´x],
register the preî ´x code on the next screen. Enter the preî ´x code using the numeric keys, select [Pause], and then
select [Apply]. If you do not insert a pause, the preî ´x code is not registered.
[PSTN]
[PB
X]
*1
[Preî ´x]
Preî ´x Code
[Hooking]
*1
Depending on your country or r
egion, the setting may not be displayed, or its content or default setting may be different.
[Archive TX Document]
[Menu]
[Function Settings] [Send] [Fax Settings]
Specify whether the content of sent fax
es is automatically forwarded or saved to a preset destination.
Backing Up
Sent Fax
es(P. 269)
If you specify [On] in this setting, also specify the forwarding or save destination and, if needed, the î ´le name.
[Use TX Document Archiving]
[Off]
[On]
Ar
chive Address
[File Name]
[Conî ´rm Enter
ed Fax Number]
[Menu]
[Function Settings] [Send] [Fax Settings]
Specify whether a scr
een for re-entering the number appears when you enter a fax number using the numeric keys.
Conî ´rming the Destination befor
e Sending(P. 370)
[Off]
[On]
[Allow Fax Driver TX]
[Menu]
[Function Settings] [Send] [Fax Settings]
Settings Menu Items
489
To Next Page
Loading...
Need help?
General
