Canon MF264dw II User Manual

Easy Conn. via PC ended due to timeout Device will restart.
30 minutes have elapsed since the start of the cableless setup mode without connecting to the computer.
Restart the Machine, and Start Cableless Setup Mode Again.
Administrator privileges are required.
[Home] on the control panel [Menu] [Preferences] [Network] [Easy Connection via PC] [Yes]
start the settings on the computer
Encryption key is not set correctly. Check the encryption key settings.
The network key (encryption key) of the wireless LAN router (access point) is not congured correctly on the machine.
Alternatively, the WEP authentication method of the machine does not match that of the wireless LAN router.
Reset the Network Key.
Check the network key of the wireless LAN router, and congure the settings correctly on the machine.
Connecting to a Wireless LAN(P. 57)
Match the WEP Authentication Method on the Machine and Wir
eless LAN Router.
The machine may be set to Shared Key Authentication, and the wireless LAN router may be set to Open
System Authentication. Change the WEP setting according to the authentication method you are using.
When Using Open System Authentication
Connect to the wireless LAN using either of the following methods:
● Connect with the access point setup method.
Connecting to a Wireless LAN by Searching for a
Router (Access Point Setup Method)(P
. 65)
● Using the Manual Setup Method, connect with the WEP authentication method set to [Open System].
Connecting to a Wireless LAN by Setting the Details (Manual Setup Method)(P. 68)
When Using Shar
ed Key Authentication
On the wireless LAN router, change the WEP authentication method to "Shared Key", and connect again.
For the setup method, see the manual of the wireless LAN router or contact the manufacturer.
IEEE 802.1X error. Cannot analyze auth. server certicate.
Check the certicate of the authentication server, and change the setting, as needed.
Check the Certicate of the RADIUS Server, and Change the Setting, as Needed.
Setting IEEE 802.1X(P. 356)
IEEE 802.1X error. Change the auth. password.
The password has expired.
Set a New Password.
Setting IEEE 802.1X(P. 356)
IEEE 802.1X error. Check the auth. settings.
The authentication method set on the machine does not match that set on the RADIUS server.
Check the Authentication Method Set on the RADIUS Server, and Set This Corr
ectly.
Setting IEEE 802.1X(P. 356)
Troubleshooting
630

Canon MF264dw II Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	Up to 600 x 600 dpi
Duplex Printing	Yes
Paper Size	Letter, Legal, A4, A5, B5, Executive
Copy Resolution	Up to 600 x 600 dpi
Display	5-line LCD
Print Speed	30 ppm
Paper Handling Input	250 sheets
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing	Apple AirPrint, Canon PRINT Business, Mopria
Scanner Type	Flatbed
Scan Resolution	600 x 600 dpi
Copy Speed	Up to 30 cpm
Automatic Document Feeder	Yes