Cisco 7940 User Manual

Editing or Modifying a Group
Cisco 7960/7940 Telephone User Guide Voice Mail Features (Option B Menu) 139
620-05600070B
• Play the group name - press 4
• Change the name - press 5
• Go back to the previous menu - press *.
NOTE: To edit group (corporate or company) distribution lists, you must be in the mailbox
for your company's main number. If the group does not exist, the user will hear
“ The group number xx does not exist, Please try again. ”
Listing Members of a Group
If you pressed 1 for a list of all distribution group members, the following happens:
1. The total number of members in the group is announced.
2. The extension of each member is announced.
3. Press # to skip to the next entry in the list before the number being announced
is finished.
Adding a Member to a Group
If you pressed 2 to add a distribution group member, do the following:
1. After the prompt, enter the extension number of the member you wish to add.
2. Press the # sign.
• The extension number you entered is played back to you for confirmation.
3. Press the # key to add the user or * key to cancel.
• If you press # and the member does not exist, you will hear “The member
has been successfully added to this group.”
• If you press # and the member already exists, you will hear “The member
already exists in this group, please try again.”
• If you press *, you will be asked to reenter the extension number to add.
Deleting a Group Member
If you pressed 3 to delete a distribution group member, do the following:
1. After the prompt, enter the extension number of the member you wish to
delete.
2. Press the # sign.
• The extension number you entered is played back to you for confirmation.
3. Press the # key to delete the user or * key to cancel.
• If you press # and the member exists, you will hear “The member has
been successfully deleted from this group.”

Cisco 7940 Specifications

General

Brand	Cisco
Model	7940
Category	IP Phone
Language	English