Cisco 7940 User Manual

Deleting an Abbreviated Dial Code
Cisco 7960/7940 Telephone User Guide System Telephone Features 23
620-05600070B
NOTE: Be sure to enter all the numbers normally required to dial the call. This includes
the area code for long distance calls and may include the area code for local calls
in some areas.
6. Press # to save the changes or * to exit without saving.
7. Program or verify another Abbreviated Dial code or hang up to exit.
Deleting an Abbreviated Dial Code
1. Press 75*.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt will lead you through the remaining steps.
3. Press 1 to program (set) the Abbreviated Dial code (00-99).
4. Press the digits of the Abbreviated Dial code to delete followed by the # sign.
A confirmation message tells you: “No number was entered.”
5. Program or verify another Abbreviated Dial code or hang up to exit.
Verifying an Abbreviated Dial Number
1. Press 75*.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
3. Press 2 to verify (check) an Abbreviated Dial code (00-99).
4. Press the Abbreviated Dial code you wish to verify.
The phone number you entered for this Abbreviated Dial number is repeated
back.
5. Program or verify another Abbreviated Dial code or hang up to exit.
Anonymous Call Rejection
When enabled, this feature rejects calls from callers who block the display of their
caller ID information.
Enabling Anonymous Call Rejection
1. Press *77 on the telephone keypad.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
3. Hang up.
On any subsequent incoming call that provides no caller ID, the calling party gets
a message that the party they are calling does not accept anonymous calls.

Cisco 7940 Specifications

General

Brand	Cisco
Model	7940
Category	IP Phone
Language	English