Privacy Guard
70 System Telephone Features Cisco 7960/7940 Telephone User Guide
620-05600070B
6. When you are done listening to numbers, press * to return to the main menu.
7. Select a menu item or hang up.
Deleting from the List
1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 6 to delete the numbers in the Selective Call List.
4. Select from the available options:
• If you know the phone number you wish to delete, press 1.
• To hear a list of numbers to delete, press 2.
• To delete all numbers, press 3,
• To return to the main menu, press the * key
5. If you pressed 1, do the following:
a. Enter the number to remove.
b. Press # to remove or press * to cancel (return to the main menu).
c. If you pressed #, the system repeats the number you entered.
d. Press # to delete the entry or * to exit without saving.
e. Select a menu item or hang up.
6. If you pressed 2, do the following:
a. The first number in the Selective Call List is played.
b. Press 1 to delete the number or # to hear the next number.
c. Repeat these steps until you are finished deleting numbers.
d. Press * to exit.
e. Select a menu item or hang up.
7. If you pressed 3, all numbers in the list are immediately deleted and you
return to the main menu.
C A U T I O N
There is no confirmation for deleting all numbers in the Selective Call List.
To Next Page
Loading...
Need help?
General
