Cisco ASR 1000 Configuration Guide

7-30
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 7 Configuring the ATM SPAs
Configuration Examples
ip mtu 4470
pvc 100/50
cbr 7000
encapsulation aal5snap
service-policy input Leased_Line_Ingress
max-reserved-bandwidth 100
PVC Ranges on a Multipoint Subinterface for PPPoEoA Configuration Example
Note Multipoint subinterfaces, PVC ranges, and PPPoEoA support is introduced for the Cisco ASR 1000
Series Routers in Cisco IOS XE Release 2.5.
interface atm0/0/0.65000 multipoint
range pvc 1/32 1/4031
protocol pppoe group bba_group1
pvc-in-range 1/32
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/33
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/34
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/35
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/36
class-vc pvcr_bba_vc_class
!
AToM VP Cell Mode Relay Configuration Example
pseudowire-class vp-cell-relay
encapsulation mpls
exit
interface atm 1/2/0.1 multipoint
atm pvp 1 l2transport
xconnect 10.0.0.1 123 pw-class vp-cell-relay
PPPoEoA VC Class and PVC Range Configuration Example
bba-group pppoe bba_group1
virtual-template 1
!
vpdn enable
no vpdn logging
!
no virtual-template snmp
!
bba-group pppoe bba_group1
virtual-template 1
sessions per-mac limit 4000
!
vc-class atm pvcr_bba_vc_class

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English