Cisco ASR 1000 Configuration Guide

4
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Troubleshooting the SIP
Preparing for Online Insertion and Removal of the SIP and SPAs
To activate a SIP and its installed SPAs after the SIP has been deactivated, use the following command
in global configuration mode:
For more information about chassis slot numbering, see the “Identifying Slots and Subslots for the SIP
and SPAs” section on page 4-1.
Verifying Deactivation and Activation of a SIP
To verify the deactivation of a SIP, enter the show platform command in privileged EXEC configuration
mode. Observe the State field associated with the SIP that you want to verify.
The following example shows that the Cisco ASR1000-SIP10 located in slot 1 is deactivated.
Router# show platform
Chassis type: ASR1006
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1000-SIP10 ok 2d20h
0/0 SPA-1XOC12-POS ok 2d20h
0/1 SPA-1XOC12-POS ok 1d21h
0/2 SPA-5X1GE-V2 ok 2d20h
0/3 SPA-4XOC3-POS-V2 ok 2d20h
1 ASR1000-SIP10 disabled 1d23h
R0 ASR1000-RP1 ok, active 1w3d
F0 ASR1000-ESP10 ok, active 1w3d
P0 Unknown ps, fail never
P1 Unknown ps, fail never
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 06120701 12.2(20071009:051408) [gschnorr-mcp_...
1 07091401 12.2(20070807:170946) [gschnorr-mcp_...
R0 07010515 12.2(33r)XN2
F0 07021400 12.2(20071030:180953) [gschnorr-mcp_...
To verify activation and proper operation of a SIP, enter the show platform command and observe “ok”
in the State field as shown in the following example:
Router# show platform
Chassis type: ASR1006
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1000-SIP10 ok 03:19:46
0/0 SPA-5X1GE-V2 ok 03:18:28
Command Purpose
Router(config)# hw-module slot slot-number
start
Activates the SIP in the specified slot and its installed
SPAs, where:
• slot-number—Specifies the chassis slot number
where the SIP is installed.
• start—Activates the SIP and removes it from reset
mode.

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English