Cisco ASR 1000 Configuration Guide

6-2
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 6 Overview of the ATM SPAs
Release History
Release History
Supported Features
This section provides a list of some of the primary features supported by the ATM hardware and
software:
• Basic Features, page 6-2
• SONET/SDH Error, Alarm, and Performance Monitoring, page 6-3
• Layer 2 Features, page 6-4
• Layer 3 Features, page 6-4
• High Availability Features, page 6-6
Basic Features
• Bellcore GR-253-CORE SONET/SDH compliance (ITU-T G.707, G.783, G.957, G.958)
• Interface-compatible with other Cisco ATM adapters
Release Modification
Cisco IOS XE
Release
2.5
The following SPA support was introduced on the Cisco ASR 1000 Series
Routers in Cisco IOS XE Release 2.5:
• 1-Port Clear Channel OC-12 ATM SPA
The following new feature support was introduced for the ATM SPAs in
Cisco IOS XE Release 2.5:
• Access Node Control Protocol (ANCP)
• ATM Multipoint Subinterfaces
• ATM P V C Rang e s
• CISCO-PPPOE-MIB
• Local Template-Based ATM PVC Provisioning
• Point-to-Point Protocol Over Ethernet Over ATM (PPPoEoA)
• PPPoE Connection Throttling
In addition to the “Configuring the ATM SPAs” chapter in this guide, see
also the new features list for Cisco IOS XE Release 2.5 for more details
about these features at:
http://www.cisco.com/en/US/products/ps9587/products_feature_guides_li
st.html
Cisco IOS XE
Release
2.3
Initial release for the 1-Port Clear Channel OC-3 ATM SPA and 3-Port
Clear Channel OC-3 ATM SPA for Cisco ASR 1000 Series Routers.

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English