Cisco ASR 1000 Configuration Guide

CHAPTER
8-1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
8
Troubleshooting the ATM SPAs
This chapter describes techniques that you can use to troubleshoot the operation of your ATM SPAs.
• General Troubleshooting Information, page 8-1
• Performing Basic Interface Troubleshooting, page 8-3
• Displaying Additional ATM SPA Data, page 8-5
• Using the Cisco IOS Event Tracer to Troubleshoot Problems, page 8-9
• Preparing for Online Insertion and Removal of a SPA, page 8-9
For more information about troubleshooting your hardware installation, refer to the Cisco Aggregation
Services Router 1000 Series SIP and SPA Hardware Installation Guide.
General Troubleshooting Information
This section provides the following general information for troubleshooting ATM SPA cards and their
SPA interface processor (SIP) carrier cards:
• Interpreting Console Error and System Messages, page 8-1
• Using debug Commands, page 8-2
• Using show Commands, page 8-2
Interpreting Console Error and System Messages
To view the explanations and recommended actions for Cisco ASR 1000 Series Routers error messages,
including messages related to Cisco ASR1000-SIP10 and SPAs, refer to the
System Messages for Cisco
IOS XE.
System error messages are organized in the documentation according to the particular system facility
that produces the messages. The SIP and SPA error messages use the following facility names:
• ASR1000_RP_ATM_SPA
• ASR1000_RP_SPA
• ASR1000_SIP
• ASR1000_SIP_SPA
• ATM S PA
• SPA

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English