Cisco ASR 1000 Configuration Guide

17-18
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 17 Configuring the 2-Port and 4-Port Clear Channel T3/E3 SPAs
Configuration Examples
0 P-bit Unavailable Secs, 0 CP-bit Unavailable Secs
0 CP-bit Far-end Unavailable Secs
0 Near-end path failures, 0 Far-end path failures
No FEAC code is being received
MDL transmission is disabled
Configuration Examples
This section includes the following configuration examples:
• DSU Configuration Example, page 17-18
• MDL Configuration Example, page 17-18
• Scrambling Configuration Example, page 17-19
• Framing Configuration Example, page 17-19
• Encapsulation Configuration Example, page 17-19
• Cable Length Configuration Example, page 17-19
• Invert Data Configuration Example, page 17-20
• Trace Trail Buffer Configuration Example, page 17-20
DSU Configuration Example
The following example configures DSU on interface port 0 on slot 2, subslot:
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 2/1/0
!
! Specify the DSU mode
!
Router(config-if)# dsu mode 0
!
! Specify the DSU bandwidth
!
Router(config-if)# dsu bandwidth 10000
!
! Set the DSU bandwidth to accept or reject the incoming remote requests
!
Router(config-if)# dsu remote accept
MDL Configuration Example
The following example configures the MDL strings on interface port 0 on slot 2, subslot 1:
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 2/1/0
!
! Specify the MDL strings
!
Router(config-if)# mdl string eic beic
Router(config-if)# mdl string lic beic
Router(config-if)# mdl string fic bfix

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English