Cisco ASR 1000 Configuration Guide

26-6
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 26 Upgrading Field-Programmable Devices
Optional FPD Procedures
The output display in this example shows that the SPA in subslot 0/1 is disabled because one of the
programmable devices does not meet the minimum version requirements.
Router# show hw-module all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
0/0 SPA-4XOC3-POS 1.0 1-I/O FPGA 3.4 3.4
---- ---------------------- ------ ------------------ ----------- --------------
0/1 SPA-2XT3/E3 <DISABLED> 1.0 1-ROMMON 2.12 2.12
2-I/O FPGA 0.6 1.0 *
3-E3 FPGA 1.0 1.4 *
4-T3 FPGA 1.0 1.4 *
---- ---------------------- ------ ------------------ ----------- --------------
0/2 SPA-1X10GE-L-V2 1.0 1-10GE I/O FPGA 1.9 1.9
---- ---------------------- ------ ------------------ ----------- --------------
0/3 SPA-1X10GE-L-V2 1.0 1-10GE I/O FPGA 1.9 1.9
==== ====================== ====== =============================================
NOTES:
- FPD images that are required to be upgraded are indicated with a '*'
character in the "Minimal Required Version" field.
- The following FPD image package file is required for the upgrade:
asr1000-fpd-bundle.pkg
==== ====================== ====== =============================================
Displaying Information About the Default FPD Image Package
You can use the show upgrade fpd package default command to find out which SPAs are supported
with your current Cisco
IOS release and which FPD image package you need for an upgrade.

Router# show upgrade fpd package default
****************************************************************************
This Cisco IOS software image requires the following default FPD Image
Package for the automatic upgrade of FPD images (the package is available
from Cisco.com and is accessible from the Cisco Software Center page where
this IOS software image can be downloaded):
****************************************************************************
Version: 12.2(XN)
Package Filename: asr1000-fpd-bundle.pkg
List of card type supported in this package:
Minimal
No. Card Type HW Ver.
---- ---------------------------------------- -------
1) 4xT SERIAL SPA 0.0
2) 1xCHSTM1 SPA 0.0
3) 2xCT3 SPA 0.100
4) 2xCT3 SPA 0.200
5) 4xCT3 SPA 0.100
<additional output removed for readability>

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English