xxiii
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Preface
Organization
This document contains the following chapters:
Cisco IOS XE Release 2.4 OL-14127-04 June 30, 2009 Information added for support of the
following SPAs:
• 2-Port, 4-Port, and 8-Port
OC-3c/STM-1 and OC-12c/STM-4
POS SPA
• 1-Port OC-48c/STM-16 POS SPA
• 8-Port OC-3c/STM-1 POS SPA
• 1-Port OC-192c/STM-64 POS/RPR
XFP SPA
• Cisco WebEx Node for ASR 1000
Series
Cisco IOS XE Release 2.3 OL-14127-03 November 24,
2008
Information added for support of the
following SPA:
• 1-Port and 3-Port Clear Channel
OC-3 ATM SPA
Cisco IOS XE Release 2.2 OL-14127-02 September
10, 2008
Information added for support of the
following SPAs:
• 2-Port and 4-Port OC-48c/STM-16
POS SPA
• 1-Port Channelized STM-1/OC-3
SPA
Cisco IOS XE Release 2.1 OL-14127-01 April 25,
2008
First release.
Chapter Title Description
Chapter 1 Using Cisco IOS XE Software Provides an introduction to accessing the
command-line interface (CLI) and using the Cisco
IOS software and related tools.
Chapter 2 SIP and SPA Product Overview Provides a brief introduction to the SIP and SPA
products on the Cisco ASR 1000 Series Routers,
and information about the SIP and SPAs, and optics
compatibility.
Chapter 3 Overview of the SIP Describes release history, and feature and
Management Information Base (MIB) support for
the SIP on the Cisco ASR 1000 Series Routers.
Chapter 4 Configuring the SIP Describes related configuration and verificationï€
information for the SIP on the Cisco ASR 1000
Series Routers.