PurposeCommand or Action
(Optional) Sets the number of maximum unacknowledged records
on the IPDR Exporter. The valid range is from 5 to 200 records.
The default value is 200.
ipdr exporter max-unacked records
Example:
Router(config)# ipdr exporter max-unacked
Step 4
200
(Optional) Sets the acknowledged records timeout interval on
the IPDR Exporter. The valid range is from 5 to 60 seconds. The
default value is 60.
ipdr exporter ack-timeout time_interval
Example:
Router(config)# ipdr exporter ack-timeout
Step 5
60
Enables the CMTS application to start the IPDR exporter process
to connect the exporter and the collector.
ipdr exporter start
Example:
Router(config)# ipdr exporter start
Step 6
Configuration Examples for IPDR Streaming Protocol
Example: Configuring the IPDR Session
The following example shows how to configure the IPDR session.
Router> enable
Router# configure terminal
Router(config)# ipdr session 1 test no_descr
Example: Configuring the IPDR Type
The following example shows how to configure the IPDR “time-interval” session type for a time interval of
15 minutes.
Router> enable
Router# configure terminal
Router(config)# ipdr type 1 time-interval 15
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
116
IPDR Streaming Protocol
Configuration Examples for IPDR Streaming Protocol