Cisco cBR 8 User Manual

•
DOCS-IF-MIB
•
DOCS-IFEXT2-MIB
•
DOCS-QOS-MIB
•
DOCS-IF3-MIB
•
DOCS-IF31-MIB
•
DOCS-QOS3-MIB
•
DOCS-IETF-QOS-MIB
•
DOCS-BPI-PLUS-MIB
•
DOCS-LOADBALANCING-MIB
•
DOCS-LOADBAL3-MIB
•
DOCS-DSG-IF-MIB
•
CISCO-DOCS-EXT-MIB
•
CISCO-CABLE-WIDEBAND-MIB
•
CISCO-CABLE-SPECTRUM-MIB
This feature is enabled by default on the Cisco cBR routers. The time interval for which the SNMP cache
information is stored on the Supervisor is known as age and set to 5 seconds.
How to Configure SNMP Cache Engine Enhancement
Before You Begin
You must configure the service internal command in global configuration mode to enable or disable SNMP
Cache Engine Enhancement.
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
•
Enter your password, if prompted.
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Sets the SNMP cache status to active.cable snmp cache active
Step 3
Example:
Router(config)# cable snmp cache active
Use the no form of the command to disable the SNMP
cache status.
Note
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
83
SNMP Engine Enhancement
How to Configure SNMP Cache Engine Enhancement

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English