snmp-server view viewA ipForward included
snmp-server view viewA ciscoPingMIB included
snmp-server view viewB ipForward included
snmp-server view viewB ciscoPingMIB included
snmp-server enable traps
snmp-server host 192.168.2.3 vrf CustomerA commA udp-port 7002
snmp-server host 192.168.2.4 vrf CustomerB commB udp-port 7002
snmp mib community-map commA context A target-list commAvpn
! Configures source address validation
snmp mib community-map commB context B target-list commBvpn
! Configures source address validation
snmp mib target list commAvpn vrf CustomerA
! Configures a list of VRFs or from which community commA is valid
snmp mib target list commBvpn vrf CustomerB
! Configures a list of VRFs or from which community commB is valid
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Command List, All ReleasesCisco software commands
Cisco IOS Network Management Command Reference
Cisco Network Management commands
“ Configuring SNMP Support ” chapter in the Cisco
Network Management Configuration Guide
SNMP configuration
SNMP Notification Support for VPNsSNMP Support for VPNs
Standards
TitleStandard
--None
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
•
CISCO-PING-MIB
•
IP-FORWARD-MIB
•
SNMP-VACM-MIB, The View-based Access
Control Model (ACM) MIB for SNMP
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
77
SNMP Support over VPNs—Context-Based Access Control
Additional References
To Next Page
Loading...
Need help?
General
