Cisco cBR 8 User Manual

DescriptionSyslog LevelKeywordSmart Call Home
Level
Minor conditions.Error (3)minor4
Warning conditions.Warning (4)warning3
Basic notification and informational
messages. Possibly independently
insignificant.
Notice (5)notification2
Normal event signifying return to normal
state.
Information (6)normal1
Debugging messages.Debug (7)debugging0
Syslog Pattern Matching
When you subscribe a destination profile to the Syslog alert group, you can optionally specify a text pattern
to be matched within each syslog message. If you configure a pattern, a Syslog alert group message is sent
only if it contains the specified pattern and meets the severity threshold. If the pattern contains spaces, you
must enclose it in quotes ("") when configuring. You can specify up to five patterns for each destination
profile.
Configuring Snapshot Command List
To configure the snapshot command list, perform the following steps:
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enters Call Home configuration mode.call-home
Example:
Device(config)# call-home
Step 2
Enters snapshot configuration mode.[no | default ] alert-group-config snapshot
Step 3
Example:
Device(cfg-call-home)# alert-group-config snapshot
The no or default command removes the snapshot
command.
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
18
Call Home
Configuring Call Home

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English