Cisco cBR 8 User Manual

PurposeCommand or Action
Specifies the maximum number of login attempts a user is
allowed before the router disconnects the SSH session. The
valid range is 1 to 5, with a default of 3 attempts.
ip ssh authentication-retries n
Example:
Router(config)# ip ssh authentication-retries
3
Step 8
Example:
Router(config)#
Enables SCP access on the Cisco CMTS.ip scp server enable
Example:
Router(config)# ip scp server enable
Step 9
Example:
Router(config)#
Exits global configuration mode and returns to privileged EXEC
mode.
end
Example:
Router(config)# end
Router#
Step 10
Configuring the Cisco CMTS for SSL Operation
This section describes the procedures to configure the Cisco CMTS for secure socket layer (SSL) operation,
so that the Usage-based Billing feature can use an SSL connection to transfer the billing record files in streaming
mode.
This procedure is required only when using the secure option with the cable metering destination
command.
Note
Prerequisites for CA
•
The billing application server must be configured for SSL operations.
•
A Certificate Authority (CA) must be configured to provide the required digital certificates to the billing
application and Cisco CMTS router. The CA can be a public CA, such as Verisign, or a server on your
private management network that is running software such as the Cisco Provisioning Center (CPC).
SUMMARY STEPS
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
166
Usage-Based Billing (SAMIS)
Configuring the Cisco CMTS for SSL Operation

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English