Cisco DMS-DMP-4300G User Manual

8-8
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
Chapter 8 Start Here
Procedures
Procedure
Step 1 Click Restore Default Settings in the Administration list.
Step 2 Click Restore when the Restore Default Settings page appears.
Your DMP restarts automatically and its factory settings are restored.
Step 3 (Optional) Will you deploy your DMP where there is no local DHCP server? If so, complete the
“Preconfigure a DMP To Run Without a Local DHCP Server” procedure in the getting started guide for
your DMP.
Step 4 Log in with the factory default username admin.
Step 5 Reconfigure your DMP and change its default passwords, when prompted.
To learn how, see G
etting Started Guide for Cisco Digital Media Players at
http://cisco.com/en/US/docs/video/digital_media_systems/dmp/getting/started/guide/5_2_x/dmp5_2_x.html .
Step 6 Stop. You have completed this procedure.
Investigate Which DMP Firmware Updates Are Available
Procedure
Step 1 Log in to your Cisco.com account, and then go to http://cisco.com/cgi-bin/tablebuild.pl/dms.
Step 2 Click Digital Media Players in the far-right column.

Cisco DMS-DMP-4300G Specifications

General

Brand	Cisco
Model	DMS-DMP-4300G
Category	Media Player
Language	English