8-11
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
Chapter 8 Start Here
Reference
Step 3 Navigate to the firmware update that you downloaded, and then choose it.
Step 4 Click Start Upgrade.
Note Do not close or browse away from this page until messages in DMPDM state that your DMP has loaded the
firmware image and started to burn it. Otherwise, upgrade fails.
Step 5 Stop. You have completed this procedure.
Related Topics
• Enable or Disable Types of Access to Your DMP, page 9-6
• UI Reference: Elements to Upgrade or Downgrade DMP Firmware, page 8-12
View DMP Hardware and Firmware Versions
Procedure
Step 1 Click Hardware and Firmware Versions to see information about your DMP.
You cannot change the information.
Step 2 Stop. You have completed this procedure.
Reference
• UI Reference Topics, page 8-11
UI Reference Topics
• UI Reference: Elements to Upgrade or Downgrade DMP Firmware, page 8-12
To Next Page
Loading...
Need help?
General
