D-Link DGS-1210-10 User Manual

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
76
Figure 4.90 – L3 Functions > IPv4 Static Route – Add
The new entry will be displayed in the IPv4 static route table:
Figure 4.91 – L3 Functions > IPv4 Static Route – Static Route Table
Click the Delete button to remove the entry.
L3 Functions > IPv4 Routing Table Finder
The IPv4 Routing Table Finder page shows the current IPv4 routing table of the Switch. To find a specific
IPv4 route, enter and IPv4 address into the Network Address field and click the Search button.
Figure 4.92 – L3 Functions > IPv4 Routing Table Finder
L3 Functions > IPv6 Static Route
The IPv6 Static Route page allows user to enable and configure the IPv6 route settings.
Figure 4.93 – L3 Functions > IPv6 Static Route
IPv6 Static Route: Specifies to enable or disable the IPv6 static route feature on the Switch.
Click the Apply button to implement changes made.

D-Link DGS-1210-10 Specifications

General

Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
MAC Address Table Size	8K
VLANs	256
Jumbo Frame	9, 216 bytes
Fanless Design	Yes
Humidity	5% to 95% non-condensing
Ports	8 x 10/100/1000Base-T, 2 x SFP
Dimensions	280 x 180 x 44 mm
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C

Summary

About This Guide

Document Structure Explained

Explains the guide's four main parts: Hardware Installation, Getting Started, Web Configuration, and CLI.

Product Overview and Hardware Installation

Product Features and LED Indicators

Highlights product features, models, technologies, and LED indicators.

Installation and Safety Procedures

Covers safety cautions, unpacking, installation steps, grounding, and power handling.

Getting Started and Configuration

Initial Setup and Management Options

Explains management options, web access, connecting, logging in, and Smart Wizard.

Detailed Web Configuration Options

Covers system, L2, L3, QoS, security settings, and UI navigation.

Surveillance Mode Configuration

Covers surveillance UI, topology, device info, PoE, time settings, logs, and diagnostics.

Command Line Interface (CLI) Operations

Explains CLI connection, login, and essential commands for device management.

Appendices and Regulatory Information

Technical Specifications and Ethernet Technology

Provides hardware specs, feature summaries, and background on Ethernet technologies.

Safety, Regulatory, and Environmental Guidelines

Covers rack mounting safety, FCC compliance, general safety, and disposal information.