D-Link DGS-1210-10 User Manual

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
82
Figure 4.101 – Security > Traffic Segmentation
Forwarding Port Settings: Click Enabled or Disabled and click Apply to configure this feature.
From Port: Use the drop-down menu to select a port or all ports from that switch. This is the port that will be
transmitting packets.
To Port: Click the box of ports and will be able to forward packets. These ports will be allowed to receive
packets from the port specified above.
Click Apply to enter the settings into the Switch’s Traffic Segmentation table.
Click Select All button to check all ports or click Clear button to uncheck all ports.
Security > Safeguard Engine
D-Link’s Safeguard Engine is a robust and innovative technology that automatically throttles the impact of
packet flooding into the switch's CPU. This function helps protect the Web-Smart Switch from being
interrupted by malicious viruses or worm attacks. This option is enabled by default.
Figure 4.102 – Security > Safeguard Engine
Security > Storm Control
The Storm Control feature provides the ability to control the receive rate of broadcast, multicast, and
unknown unicast packets. Once a packet storm has been detected, the Switch will drop packets coming into
the Switch until the storm has subsided.

D-Link DGS-1210-10 Specifications

General

Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
MAC Address Table Size	8K
VLANs	256
Jumbo Frame	9, 216 bytes
Fanless Design	Yes
Humidity	5% to 95% non-condensing
Ports	8 x 10/100/1000Base-T, 2 x SFP
Dimensions	280 x 180 x 44 mm
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C

Summary

About This Guide

Document Structure Explained

Explains the guide's four main parts: Hardware Installation, Getting Started, Web Configuration, and CLI.

Product Overview and Hardware Installation

Product Features and LED Indicators

Highlights product features, models, technologies, and LED indicators.

Installation and Safety Procedures

Covers safety cautions, unpacking, installation steps, grounding, and power handling.

Getting Started and Configuration

Initial Setup and Management Options

Explains management options, web access, connecting, logging in, and Smart Wizard.

Detailed Web Configuration Options

Covers system, L2, L3, QoS, security settings, and UI navigation.

Surveillance Mode Configuration

Covers surveillance UI, topology, device info, PoE, time settings, logs, and diagnostics.

Command Line Interface (CLI) Operations

Explains CLI connection, login, and essential commands for device management.

Appendices and Regulatory Information

Technical Specifications and Ethernet Technology

Provides hardware specs, feature summaries, and background on Ethernet technologies.

Safety, Regulatory, and Environmental Guidelines

Covers rack mounting safety, FCC compliance, general safety, and disposal information.