CE870 Instant Issuance System User’s Guide 19
Use the Front Panel
The front panel of the printer provides the controls you need to operate the system. The front
panel controls are described in the following sections.
Power Button
Use the POWER button to power the system off and on. All lights show steady amber while the
system powers on.
To power off the system, press the P
OWER button for 1 to 2 seconds until the system powers off.
To power off the system while processing cards, press the button for 2 or more seconds. Card jobs
do not complete and are sent to the reject tray.
Down Arrow, Up Arrow, and Enter Key
Use the arrow keys to move through the LCD menu system and the ENTER key to make a selection.
Refer to “Use the LCD Panel Menus” on page 22 for details.
Press the up or down arrow key while the LCD panel displays Ready to display additional
information about the printer on line 2, including the firmware version, printer model, serial
number, network IP address, embosser serial number and version, and supply part numbers. If
you do not press a key for 30 seconds, the LCD panel returns to the default Ready message.
Up
Arrow
Enter
Down
Arrow
Power
Button
LCD Panel
Status Lights
Ribbon
Cards
User Light &
User Button
To Next Page
Loading...
Need help?
General
