CE870 Instant Issuance System User’s Guide 21
Ribbon Light
The ribbon light flashes green when the indent ribbon or topping foil levels are low or out, or
when there is a problem with a supply. If the system has the optional printhead installed, the light
flashes amber if there is a problem with the print ribbon. Refer to “Messages and Conditions” on
page63 for a list of the LCD messages that correspond to the ribbon light.
Card Light
The card light flashes green when the system has a card problem in the embosser component and
flashes amber when the system has a card problem in the printer component.
A message displays on the LCD panel with details of the problem when the card light is flashing
quickly (every 1/2 second). Refer to “Messages and Conditions” on page 63 for a list of the LCD
messages that correspond to the card light.
Off The supply levels are okay.
Flashing green A flashing light indicates one of the
following:
A problem with an embosser supply.
The embosser supply level is low. The
light blinks slowly (every 2 seconds).
The embosser supply is out. The light
blinks quickly (every 1/2 second).
Flashing amber There is a problem with the print ribbon, if
the optional printhead is installed.
Off The cards are okay.
Flashing green There is a card problem in the embosser
component. The light flashes quickly (every
1/2 second).
Flashing amber There is a card problem in the printer
component. The light flashes quickly (every
1/2 second).
To Next Page
Loading...
Need help?
General
